Support > About cloud server > A Comprehensive Analysis of OpenClash and IPv6 Conflicts: A Complete Troubleshooting Guide—From Traffic Bypassing to DNS Leaks
A Comprehensive Analysis of OpenClash and IPv6 Conflicts: A Complete Troubleshooting Guide—From Traffic Bypassing to DNS Leaks
Time : 2026-11-17 16:50:42
Edit : Jtti

When using OpenClash within an OpenWrt "side-router" (router-on-a-stick) configuration, IPv6 often exhibits a paradoxical state: devices may successfully obtain a public IPv6 address, yet fail to access foreign websites—or, according to speed-test tools, continue to route traffic through the local ISP’s IPv6 gateway. Consequently, many conclude that "IPv6 and OpenClash are inherently incompatible," forcing a choice between maintaining proxy functionality (by disabling IPv6) or preserving IPv6 connectivity (by disabling the proxy).

The root cause is not a fundamental "incompatibility," but rather the existence of multiple paths—within the side-router architecture—through which IPv6 traffic and DNS queries can bypass OpenClash. Only by identifying and blocking these bypass routes can IPv6 and proxy rules truly coexist.

Conflict 1: RA advertisements cause IPv6 traffic to "skip" the side-router

In an IPv4 environment, devices requiring proxy services are configured to point their gateway to the side-router, ensuring traffic passes through OpenClash. In contrast, IPv6 gateways are not assigned via DHCP; instead, they are automatically distributed by the main router through Router Advertisements (RA). If the side-router does not intervene in this process, devices will identify the main router itself as the IPv6 gateway. As a result, all IPv6 traffic bypasses the side-router entirely, rendering OpenClash’s rules ineffective.

Solution: In the OpenWrt interface, navigate to the LAN "DHCP Server" → "IPv6 Settings" section. Set the RA service, DHCPv6 service, and NDP proxy to "relay mode," or simply enable the NDP proxy. Relay mode allows the side-router to forward the main router’s RA advertisements and handle Neighbor Discovery (ND) responses on its behalf. This ensures that while devices retain the IPv6 prefix assigned by the main router, the side-router is incorporated into the IPv6 traffic path. After configuration, verify on the client device—using a command like `ip -6 route`—that the default IPv6 gateway points to the link-local address of the side-router.

Conflict 2: Forcing IPv6 traffic through a proxy node that does not support IPv6 egress

This is the most common technical reason why users find themselves unable to access the internet after enabling OpenClash. If your proxy node only provides an IPv4 egress, but "IPv6 Traffic Proxying" is enabled in OpenClash, requests from your device destined for IPv6 addresses will be routed into the TUN interface and subsequently sent to a node lacking IPv6 egress—inevitably resulting in a timeout.

How to verify: In OpenClash, navigate to "Plugin Settings" → "IPv6 Settings." If your node does not support IPv6 egress, you should disable "IPv6 Traffic Proxying" and enable "Filter IPv6 AAAA Records." This ensures that domain names requiring proxying resolve only to IPv4 addresses; your device will not attempt to connect via IPv6, and requests will correctly follow the IPv4 proxy path. Conversely, if your node *does* support IPv6 egress, keep both "IPv6 Traffic Proxying" and "Allow IPv6 DNS Resolution" enabled, allowing the Clash core to intercept IPv6 traffic via the TUN interface.

To determine whether a node supports IPv6 egress, enable IPv6 traffic proxying, then visit `ipleak.net` or `test-ipv6.com` to check whether both the IPv4 and IPv6 addresses of your proxy node are displayed.

Conflict 3: Timing Mismatch Between DNS Resolution and IPv6 Routing in Fake-IP Mode

In Fake-IP mode, OpenClash returns a synthetic (fake) IPv4 address for a domain name, while the actual resolution is performed by the core in the background. However, if a client also receives an IPv6 AAAA record—and the system follows an "IPv6-first" policy—some applications may attempt to connect via IPv6. Since this connection is not covered by the Fake-IP mechanism, it bypasses the proxy rules entirely.

Resolution: In Fake-IP mode, if your node does not support IPv6 egress, filtering AAAA records is mandatory. If your node *does* support IPv6, but you wish to ensure that all proxied traffic is routed through the TUN interface, you must verify that the TUN mode has successfully intercepted IPv6 traffic (check the client's routing table to confirm the presence of an IPv6 default route pointing to the TUN interface). A more thorough solution is to enable DNS hijacking in OpenClash. This forces all queries directed to port 53 (including IPv6 DNS) to be routed through OpenClash, preventing local ISP-provided DNS servers from returning AAAA records that allow direct connections—which would otherwise cause applications to bypass the proxy prematurely.

Conflict 4: The "side-router" (secondary router) lacks IPv6, causing upstream resolution to fail.

As the host for OpenClash, the side-router must be capable of obtaining an IPv6 address. If the side-router’s WAN interface fails to acquire an IPv6 address or prefix, OpenClash will be unable to process IPv6 DNS queries. This manifests as a situation where "Allow IPv6 DNS resolution" is enabled, yet foreign IPv6-based websites remain inaccessible.

Troubleshooting: Run `ip -6 addr show` and `ip -6 route show` on the side-router to verify the presence of a global IPv6 address and a default IPv6 route. If the side-router only possesses a link-local address (starting with `fe80::`), it indicates that the WAN interface has failed to obtain an IPv6 address. In this case, check the IPv6 prefix delegation settings on the primary router and the DHCPv6 client configuration on the side-router’s WAN interface.

A Pragmatic Configuration Decision Tree

When addressing conflicts between IPv6 and OpenClash, follow this decision-making sequence to avoid the trial-and-error process of toggling contradictory settings:

Step 1: Determine whether your proxy nodes support IPv6 outbound traffic. If they do, enable "IPv6 traffic proxying" to allow the TUN interface to handle IPv6 traffic. If they do not, disable this option and ensure "Filter IPv6 AAAA records" is enabled, forcing domains that require proxying to return only IPv4 addresses.

Step 2: Ensure that RA/NDP relay is configured on the side-router. Otherwise, even if OpenClash is correctly set up, client devices will continue to treat the primary router as their IPv6 gateway, meaning traffic will never reach the side-router.

Step 3: Verify that DNS is fully hijacked. Enable DNS hijacking under "Plugin Settings" → "DNS Settings" to prevent client devices from using the ISP’s IPv6 DNS servers, which could otherwise lead to resolution results that do not align with the proxy’s exit point.

Step 4: Validate the configuration. Execute `curl -6 ifconfig.co` from a client device or visit `test-ipv6.com`. If the result shows the IPv6 address of your proxy node (provided the node supports IPv6), then IPv6 traffic is being correctly routed through the proxy. If, however, it returns an IPv6 address belonging to your local ISP, it indicates that the traffic is bypassing the proxy—likely due to issues with Router Advertisement (RA) or DNS resolution.

Underlying Network Quality: Ensuring Accurate Benchmarking and Stable Performance for IPv6 Traffic

The configuration steps above address the question of whether traffic is routed through the proxy. In practice, however, one often-overlooked variable is the quality of the connection between the "side-router" (gateway) and the proxy node. OpenClash’s node latency testing, DNS resolution, and traffic forwarding (in TUN mode) all rely on this upstream link. If the proxy node experiences significant packet loss—common during evening peak hours—IPv6 TLS handshakes and TCP retransmissions can cause resolution latency to spike to the order of seconds. Users may perceive this as the proxy being "slow," leading them to mistakenly believe that their traffic-routing configuration is not working.

Conflicts between OpenClash and IPv6 generally stem from three distinct issues: traffic routing (RA bypass), DNS resolution (DNS leaks), and egress capabilities (mismatches between node support and IPv6 requirements). By using NDP relaying to steer traffic back to the side-router, employing DNS hijacking to prevent leaks, and configuring the system to either proxy IPv6 traffic or filter out AAAA records based on node capabilities, you can effectively resolve these issues—ensuring that IPv6 no longer remains a blind spot in your proxy setup.

Relevant contents

Did your D: drive "vanish" after a server migration? Here’s how to recover your missing data drive. Getting persistent "Internal Error" messages on your US-based cloud server? A guide to potential causes and troubleshooting steps. Does your personal website need a dedicated IP address? A comprehensive look at the pros and cons of a dedicated IP. How Do DE-CIX and AMS-IX Differ? An In-Depth Comparison of Scale, Architecture, and Ecosystem Migrating from Traditional Shared Hosting to Unmanaged VPS: Four Major Gaps to Bridge and an Upgrade Guide What Is a Data Processing Agreement (DPA)? A Compliance and Security Framework That Cloud Server Users Must Understand Comprehensive Guide to Common Default Ports and Port Configuration Strategies for Multi-IP Servers in Website Clusters Locked Out of Your Server? A Guide to Recovering Access After Losing SSH/RDP Connectivity—Including Out-of-Band Rescue via VNC Can’t connect to a server port? A deep dive into common reasons for port unreachability and blocked access How to Open Ports on a Cloud Server? A Guide to Configuring Both Security Groups and System Firewalls
Go back

24/7/365 support.Here for you 24/7/365.

Support